Hub Boulder - Public Project Site
search
2560 PROTECTION BOARD-1/4" (AKA PQ-2560-1/4"ASPH.PROT.BRD)
TREMCO
General
Health Hazards
Carcinogenicity Category 1A
Carcinogenicity Category 1A
Polyvinyl chloride
3M High Power Brake Cleaner
3M
Compressed Gasses
Petroleum & Lubricants
Flammable Aerosol: Category 1
4/12/2022
ACQ Preserve and Preserve Plus Pressure Treated Wood
ACQ
alkaline copper quaternary
6/8/2012
AeroBarrier X1 Sealant
Aeroseal
Environmental Hazards - Acute hazards to the aquatic environment Category 3, Chronic hazards to the aquatic environment
10/10/2024
10/10/2029
Allura Fiber Cement Siding
Allura
Cement Products
• Obtain special instructions before use. - P201
• Do not handle until all safety precautions have been read and understood. - P202
• Do not breathe dust. - P260
• Wash thoroughly after handling. - P264
• Do not eat, drink or smoke when using this product. - P270
• Wear protective gloves/protective clothing/eye protection/face protection. - P280
• User personal protective equipment as required. - P281
• Do not handle until all safety precautions have been read and understood. - P202
• Do not breathe dust. - P260
• Wash thoroughly after handling. - P264
• Do not eat, drink or smoke when using this product. - P270
• Wear protective gloves/protective clothing/eye protection/face protection. - P280
• User personal protective equipment as required. - P281
1/28/2020
Portland Cement, Cellulose Fiber, Quartz, Aluminum hydroxide and Bentonite.
AVM Aussie Mate 580-AL AVM Bituminous Sheet Waterproofing Membrane
AVM Industries Inc
General
AVM Aussie Seal M
AVM Industries Inc
GHS - US Classification
Skin H315
Eye H319
Skin S H317
Skin H315
Eye H319
Skin S H317
AVM Aussie Skin 550
AVM Industries Inc
General
Hazardous Ingredients:
This product is considered to be a finished article as defined by 29 CFR 1910.1200 and is
exempt from the requirements of the Hazard Communication standard. This product is
nonhazardous as per 29 CFR 1910.1200.
This product is considered to be a finished article as defined by 29 CFR 1910.1200 and is
exempt from the requirements of the Hazard Communication standard. This product is
nonhazardous as per 29 CFR 1910.1200.
CHEMICAL NAME / SYNONYM: High Density Polyethylene (HDPE)
AVM Drain Boards 6000, 6020, 9000, 9020
AVM Industries Inc
General
GHS-US classification
Not classified
Contains no hazardous ingredients at levels requiring disclosure by the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Not classified
Contains no hazardous ingredients at levels requiring disclosure by the OSHA Hazard Communication Standard (29 CFR
1910.1200)
Calcium Hypochlorite Tablets
Axiall LLC
Sanitizers, Disinfectants, and Cleaners
9/11/2024
9/11/2025
Exterior Fiber-Cement (Medium Density) - HardiePanel and HardieSoffit.
James Hardie
Cement Products
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not breathe dust from product. Wash hands and face thoroughly after handling. Use personal protective equipment as required. If exposed or concerned: Get medical advice. If shortness of breath or other health concerns develop after exposure to dust from the product, seek medical attention. Dispose of product in accordance with local, state and national regulations. If there are no applicable regulations, dispose of in a secure landfill, or in a way that will not expose others to dust.
4/11/2022
Crystalline Silica (Quartz) and Carbon Black.
FINISHEDFOAM
HUNTSMAN
Insulation Products
Eye Contact: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention if irritation occurs.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.
Skin Contact: Flush contaminated skin with plenty of water. Get medical attention if symptoms occur.
Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical attention if symptoms occur.
Skin Contact: Flush contaminated skin with plenty of water. Get medical attention if symptoms occur.
Ingestion: Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Do not induce vomiting unless directed to do so by medical personnel. Get medical attention if symptoms occur.
3/15/2022
Urethane Plastic.
Gasoline
Unknown
Flammable
GluDown® DB Tacky Adhesive
GluDown Construction Adhesives
General
GHS-US classification
Compressed gas H280
Flam. Liq. 1 H224
Skin Irrit. 2 H315
7Eye Irrit. 2A H319
Repr. 2 H361
STOT SE 3 H336
STOT RE 2 H373
Compressed gas H280
Flam. Liq. 1 H224
Skin Irrit. 2 H315
7Eye Irrit. 2A H319
Repr. 2 H361
STOT SE 3 H336
STOT RE 2 H373
Distillates, petroleum, light hydrotreated distillate Methyl Acetate Acetone Isobutane Propane Dimethyl ether Hexane Naptha, petroleum, hydrotreated light
HANDIFOAM WINDOW & DOOR WEST FOAM SEALANT
Handi Foam
Insulation Products
P202 Do not handle until all safety precautions have been read and understood
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P284 [In case of inadequate ventilation] wear respiratory protection.
P261 Avoid breathing gas.
P280 Wear protective gloves, protective clothing, eye protection and face protection.
P262 Do not get in eyes, on skin, or on clothing
P264 Wash all exposed external body areas thoroughly after handling.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211 Do not spray on an open flame or other ignition source.
P251 Pressurized container: Do not pierce or burn, even after use.
P271 Use only outdoors or in a well-ventilated area.
P284 [In case of inadequate ventilation] wear respiratory protection.
P261 Avoid breathing gas.
P280 Wear protective gloves, protective clothing, eye protection and face protection.
P262 Do not get in eyes, on skin, or on clothing
P264 Wash all exposed external body areas thoroughly after handling.
6/25/2024
C14 alkanes, chlorinated-, (chlorinated paraffin), polymeric diphenylmethane diisocyanate, 4,4'-diphenylmethane diisocyanate (MDI), propane, iso-butane and dimethyl ether
Heatlok® HFO High Lift B-side
HUNTSMAN
Insulation Products
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H360 – May damage fertility or the unborn child.
H373 – May cause damage through repeated exposure if swallowed.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H360 – May damage fertility or the unborn child.
H373 – May cause damage through repeated exposure if swallowed.
12/17/2020
Polyurethane Resin B-side
Kingspan GreenGuard GG25-LG XPS Insulation Board
GreenGuard
Insulation Products
Board Product does not present an inhalation, ingestion, or contact health hazard unless subjected to operations such as cutting, sawing or machining which result in the generation of airborne particulate.
2/1/2024
Formic acid
Krylon Industrial Quik-Mark Solvent-Based Inverted Marking Paint (APWA), Blue
Sherwin Williams, Krylon Industrial Products
6/13/2015
Krylon Industrial Quik-Mark Solvent-Based Inverted Marking Paint (APWA), Safety Yellow
Sherwin Williams, Krylon Industrial Products
Paints & Primers
4/7/2015
Krylon Industrial Quik-Mark Solvent-Based Inverted Marking Paint (APWA), Utility White
Sherwin Williams, Krylon Industrial Products
Paints & Primers
7/20/2014
MEL-DRAIN 5012
W. R. Meadows® of Canada
General
This is a manufactured article and under WHMIS criterion is not a controlled product.
Rubinate M, Suprasec 5005, A-Side Component
HUNTSMAN
Insulation Products
H315 + H320 Causes skin and eye irritation.
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H334 May cause allergy or asthma symptoms or breathing
difficulties if inhaled.
H335 May cause respiratory irritation.
H317 May cause an allergic skin reaction.
H332 Harmful if inhaled.
H334 May cause allergy or asthma symptoms or breathing
difficulties if inhaled.
H335 May cause respiratory irritation.
11/5/2021
Diphenylmethanediisocyanate and 4,4'-methylenediphenyl diisocyanate
Sealmastic Type, I,II,III
W. R. Meadows® of Canada
General
Hazardous Warning, Causes Skin Irritation
Petroleum Asphalt, Clay
SpecFilm Concentrate
Spec Chem
7/1/2018
Survey Marking Paint
Aervoe Survey Marking Paint
Compressed Gasses
Paints & Primers
3/25/2024
Toluene
CITGO
General
See SDS for Classification of the
substance for multiple mixtures
substance for multiple mixtures
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).
TREMCO REINFORCING FABRIC-2011 36"X600'
TREMCO
General
Hazard Classification
Not classified
Not classified
TREMPrime Multi Surface Urethane Primer- Part A
TREMCO
General
Hazard Classification
Health Hazards
Skin sensitizer Category 1
Health Hazards
Skin sensitizer Category 1
Bisphenol A Polyglycidyl Ether Resin
TREMprime Multi Surface Urethane Primer-Part B
TREMCO
General
Health Hazards
Skin sensitizer Category 1
Skin sensitizer Category 1
Isophoronediamine - m-Xylenediamine
TREMprime™ WB
TREMCO
General
Health Hazards
Skin sensitizer Category 1
Carcinogenicity Category 1A
Skin sensitizer Category 1
Carcinogenicity Category 1A
Asphalt, Cellulose, Barium boron oxide, Wood rosin, Heavy paraffinic distillate,, Clay
TREMproof® 6100
TREMCO
General
Health Hazards
Carcinogenicity Category 1A
Carcinogenicity Category 1A
Asphalt, Calcium carbonate, Magnesite, Paraffinic Oil, Carbon Black, Paraffinic distillate, Amorphous silica , Zinc oxide
Unfaced Thermal and Acoustical Fiberglass Insulation
Johns Marville
Insulation Products
Temporary mechanical abrasion (itching) of skin, eyes and respiratory tract may occur upon exposure to fibers or dust during handling of this product and cannot occur unless there is direct contact.
8/23/2019
non-biopersistent (biosoluble) glass fibers